San-i-pak - One and Two Stage Shredders: Installation Specifications

ONE-STAGE SHREDDER:
The 3 phase power should be run into a distribution panel having two separate disconnects. One for the compactor section and one for the shredder. After the San-I-Pak has been installed, run power lines between fused disconnect switches (customer furnished) and San-I-Pak's electrical panel box, in accordance with local codes. The fused disconnect switches should be sized in accordance with the following specs:

15 (One 7.5 HP Motor)

Actual Amperage Draw:
208 Volt = 24.2 Amp
240 Volt = 22.0 Amp
360 Volt = 12.7 Amp
480 Volt = 11.0 Amp
550 Volt = 09.0 Amp Service Requirements:
208 Volt = 30.0 Amp
240 Volt = 27.5 Amp
360 Volt = 15.8 Amp
480 Volt = 13.7 Amp
550 Volt = 11.3 Amp Service Breaker:
30.0 Amp
30.0 Amp
20.0 Amp
15.0 Amp
15.0 Amp

From the Service Requirement Amperages, select the next highest service from the following available service breakers 15, 20, 30, 40, 50, 60, 70, 100, 125, 150, 200, 225.

TWO STAGE SHREDDER:
The 3 phase power should be run into a distribution panel having two separate disconnects; one for the compactor section and one for the shredders. After the San-I-Pak has been installed, run power lines between fused disconnect switches (customer furnished) and San-I-Pak's electrical panel box, in accordance with local codes. The fused disconnect switches should be sized in accordance with the following specs:

20 (One 15 HP Motor)

Actual Amperage Draw:
208 Volt = 46.2 Amp
240 Volt = 42.0 Amp
360 Volt = 25.5 Amp
480 Volt = 21.0 Amp
550 Volt = 17.0 Amp Service Requirements:
208 Volt = 57.7 Amp
240 Volt = 52.5 Amp
360 Volt = 31.5 Amp
480 Volt = 26.3 Amp
550 Volt = 21.3 Amp

25 (One 20 HP Motor)

Actual Amperage Draw:
208 Volt = 59.4 Amp
240 Volt = 54.0 Amp
360 Volt = 34.0 Amp
480 Volt = 27.0 Amp
550 Volt = 22.0 Amp Service Requirements:
208 Volt = 74.3 Amp
240 Volt = 67.5 Amp
360 Volt = 42.5 Amp
480 Volt = 36.0 Amp
550 Volt = 27.5 Amp

50 (One 20 HP Motor)

Actual Amperage Draw:
208 Volt = 59.4 Amp
240 Volt = 54.0 Amp
360 Volt = 34.0 Amp
480 Volt = 27.0 Amp
550 Volt = 22.0 Amp Service Requirements:
208 Volt = 74.3 Amp
240 Volt = 67.5 Amp
360 Volt = 42.5 Amp
480 Volt = 33.8 Amp
550 Volt = 27.5 Amp

Add the Service Requirement Amperages, then select the next highest service from the following available service breakers 15, 20, 30, 40, 50, 60, 70, 100, 125, 150, 200, 225.

Example:
ST-50 @ 240V = 67.5 Amp
ST-20 @ 240V = 52.5 Amp
120.0 Amp (choose 125 Amp Service Breaker)

ST-20 @ 480V = 26.3 Amp
ST-20 @ 480V = 26.3 Amp
52.6 Amp (choose 60 Amp Service Breaker)

Select a Sterilizer Series for Detailed Specifications:
2P-Series I 3P-Series I Auto-Series I Mark-Series I Source-Series I CAT-Series I AT-Series

More Products:
Sterilizers | Compactors | Shredders | Optional Equipment
Handling Equipment | Sterilizer Supplies

Select for Information on Quality Assurance & Equipment Warranty
Select for Information on Value-Add Equipment & Services
Select for Client Reference