|
San-I-Pak
compaction systems are custom designed for dock heights from 34
inches up. Unlike conventional compactor which prohibit manual
dumping from dock less than 48 inches high. San-I-Pak
compactors can be electronically coordinated with other waste
processing equipment, enabling remote Intel-I-Com monitoring of
volume performance and service status.
| XL-COMPACTOR
SPECIFICATIONS |
Measurements
|
19ft
L x 6ft W x 4ft H |
Charge
Box Capacity |
3.5
cu.yd. |
| Loading
Time |
5
minutes per cycle |
Compaction
Ratio |
6:1 |
| Hydraulic
Pump Capacity |
22
gpm double pump |
Capacity/Hour
|
6,000
lbs. |
| Normal/Maximum
Pressure |
1800/2000
psi |
Capacity
Per 8 Hour Shift |
48,000
lbs. |
| Electrical
Motor |
10
hp |
Cycle
Time |
60
seconds |
| Voltage
Requirements 3-Phase: 208V@70amps, 240V@60amps, 480v@30amps
|
| L-COMPACTOR
SPECIFICATIONS |
Measurements
|
13.5ft
L x 6ft W x 3.4ft H |
Charge
Box Capacity |
2.5
cu.yd. |
| Loading
Time |
5
minutes per cycle |
Compaction
Ratio |
6:1 |
Hydraulic
Pump Capacity
|
17.5
gpm double pump |
Capacity/Hour |
3,000
lbs. |
| Normal/Maximum
Pressure |
1800/2000
psi |
Capacity
Per 8 Hour Shift |
24,000
lbs. |
| Electrical
Motor |
10
hp |
Cycle
Time |
33
seconds |
| Voltage
Requirements 3-Phase: 208V@70amps,
240V@60amps, 480V@30amps |
| S-COMPACTOR
SPECIFICATIONS |
Measurements
|
10ft
L x 4.5ft W x 3.25ft H |
Charge
Box Capacity |
1.2
cu. yd. |
| Loading
Time |
5
minutes per cycle |
Compaction
Ratio |
6:1 |
Hydraulic
Pump Capacity
|
5.3
gpm double pump |
Capacity/Hour |
1,440
lbs. |
| Normal/Maximum
Pressure |
1800/2200
psi |
Capacity
Per 8 Hour Shift |
11,520
lbs. |
| Electrical
Motor |
3
hp |
Cycle
Time |
40
seconds |
| Voltage
Requirements 3-Phase: 208V@70amps, 240V@60amps, 480V@30amps
|
| C-COMPACTOR
SPECIFICATIONS |
| Measurements |
13.5ft
L x 6ft W x 3.4ft H |
Charge
Box Capacity |
1.75
cu. yd. |
| Loading
Time |
5
minutes per cycle |
Compaction
Ratio |
6:1 |
| Hydraulic
Pump Capacity |
17.5
gpm double pump |
Capacity/Hour
|
2,800
lbs. |
| Normal/Maximum
Pressure |
1800/2000
psi |
Capacity
Per 8 Hour Shift |
22,400
lbs. |
| Electrical
Motor |
10
hp |
Cycle
Time |
40
seconds |
| Voltage
Requirements 3-Phase: 208V@70amps, 240V@60amps, 480V@30amps |
All
equipment conforms to ANSI Safety Standards
|
